Manualshelf

User Manual

ManualsBrandsAmcrest ManualsCamera & Photo1080P Video Doorbell Camera Pro, Outdoor Smart Home 2.4GHz WiFi Doorbell Camera (Wired Power), MicroSD Card, PIR Motion Detect, RTSP, IP55 Weatherproof, 2-Way Audio, 140º Wide-Angle AD110
12345678910
Front Panel
The front panel of the device includes PIR detection sensors, IR lights, camera, microphone, speaker,
indicator light, and a call button.
Indicator Light Description
The indicator light on the front of the device will display specific status details of the device. For a
description of each status please refer to the information provided below.
Solid
Spinning
Nothing
A solid LED indicates that the Wi-Fi doorbell is properly connected to the Wi-Fi
network. If the light on the front is solid no further action needs to be taken and the
doorbell is properly added into the app.
A spinning LED indicates the Wi-Fi doorbell is in setup mode and is currently not
connected to a network. Please follow the installation instructions in the Amcrest
Smart Home app to continue.
If there is no LED on the front of the doorbell check that the terminals on the back of
your doorbell and make sure they are properly connected to the wires and that your
doorbell system meets the necessary power requirements (16 volts AC at 30 VA).
5
PIR sensor
IR Lights
Camera
Speaker
Indicator Light
Call Button
Microphone