User Manual

ManualsBrandsAmcrest ManualsComputers & Accessories8-Port POE+ Power Over Ethernet POE Switch with Metal Housing, 8-Ports POE+ 802.3af/at 96w (AGPS8E8P-AT-96)

4/8-Port PoE Switch

User’s Manual V. 1.0.0

Simple. Reliable. Secure.

4/8-Port PoE Switch

User Manual V. 1.0.0

Simple. Reliable. Secure.

Uplink

Link/Act PWR

PWR

PoE 1 PoE 2 PoE 3 PoE 4

Link/Act PoE

Link/Act PoE Link/Act PoE Link/Act

PoE

Link/Act Link/Act Link/Act Link/Act

PoE 5 PoE 6 PoE 7 PoE 8

PoE PoE PoE PoE

AGPS8E8P-AT-96

AGPS8E4P-AT-60

AMPS4E4P-AT-60

PWR

PoE 1 PoE 2 PoE 3 PoE 4

Link/Act PoE

Link/Act PoE Link/Act PoE Link/Act

PoE

5 6 7 8

Link/Act

Link/Act Link/Act Link/Act

PoE 1 PoE 2 PoE 3 PoE 4

Link/Act PoE

Link/Act PoE Link/Act PoE Link/Act PoE

Default

Extend

Summary of content (9 pages)

PAGE 1
Simple. Reliable. Secure.
PAGE 2
Important Safeguards & Warnings Attention: Please read the following safeguards and warnings carefully before using the product in order to avoid damages and losses. Note: Do not expose the device to Soot, high humidity or dust. Doing so may cause fire or electric shock. Do not install the device in direct sunlight as it may cause overheating and failure. Installation of the unit should be via the compatible rack mount or securely on a flat surface.
PAGE 3
Table of Contents 1 1.1 1.2 Product Overview Features Typical Application 3 3 3 2 2.1 2.1.1 2.1.2 2.1.3 Device Structure 4-Port PoE Switch Front Panel PoE Power Output Back Cover 4 4 4 4 4 2.2 2.2.1 2.2.2 2.2.3 8-Port PoE Switch Front Panel PoE Power Supply Back Cover 5 5 5 5 2.3 2.3.1 2.3.2 2.3.
PAGE 4
3 Product Overview 1.1 Features Common Features: Two-layer industrial POE switch. Conform to IEEE802.3, IEEE802.3u, IEEE802.3ab/z and IEEE802.3X standards. MAC auto study and aging, MAC address list capacity up to 8K on 8 port model. 10/100 Base-T on all 4 port models. 10/100/1000 Base-T ports on 8 port models with self-adapt MDI/MDIX mode. Self-adaptive RJ45 ports support IEEE802.3af, IEEE802.3at standard power supply. Industrial wide temperature design. Support DC48-57V power supply.
PAGE 5
4 Device Structure 2.1 4-Port PoE Switch (AMPS4E4P-AT-60) 2.1.1 Front Panel The front panel is shown in Figure 2-1. Link/Act PoE Default Link/Act PoE Link/Act PoE PoE 2 PoE 3 Link/Act PoE PWR Extend PoE 1 PoE 4 Uplink 53 2 1 Figure 2.1 SN Name Note 1 DIP Switch Switches between default mode/extend mode. 2 10/100 Base-T 4*10/100 Mbps self-adaptive RJ45 PoE ports. 3 Link/Act Port link status indicator light. 4 10/100 Base-T 1*10/100 Mbps self-adaptive RJ45 Uplink port.
PAGE 6
5 2.2 8-Port PoE Switch (AGPS8E4P-AT-60) 2.2.1 Front Panel The front panel is shown in Figure 2-2. PWR Link/Act PoE PoE 1 1 Link/Act PoE Link/Act PoE PoE 2 PoE 3 Link/Act PoE Link/Act PoE 4 5 Link/Act Link/Act 6 7 Link/Act 8 5 2 4 3 Figure 2.2 SN Name Note 1 Link/Act, PoE Single port link / single port PoE status indicator light. 2 10/100/1000 Base-T 1*10/100/1000 Mbps self-adaptive uplink port. 3 10/100/1000 Base-T 4*10/100/1000 Mbps self-adaptive PoE ports.
PAGE 7
6 2.3 8-Port PoE Switch (AGPS8E8P-AT-96) 2.3.1 Front Panel The front panel is shown in Figure 2-3. PWR Link/Act PoE PoE 1 1 Link/Act PoE Link/Act PoE PoE 2 PoE 3 Link/Act PoE Link/Act PoE 4 PoE 5 PoE Link/Act PoE PoE 6 Link/Act PoE 7 PoE Link/Act PoE PoE 8 4 2 3 Figure 2.4 SN Name Note 1 Link/Act, PoE Single port link / single port PoE status indicator light. 2 Uplink Port 1*10/100/1000 Mbps self-adaptive RJ45 port.
PAGE 8
7 Appendix 1 Technical Specification TECHNICAL PARAMETERS AMPS4E4P-AT-60 AGPS8E8P-AT-60 AGPS8E8P-AT-96 1*10/100 Base-T 4*10/100/1000 Mbps PoE Ports 1*10/100/1000 Mbps PoE Ports 4*10/100 Base-T 4*10/100/1000 Mbps Ports 8*10/100/1000 Mbps PoE Ports PoE Power Conumption ≤60W ≤60W ≤96W PoE PIN Assignment 1, 2, 4, 5 (V+), 3, 6, 7, 8 (V-) 1, 2, 4, 5 (V+), 3, 6, 7, 8 (V-) 1, 2, 4, 5 (V+), 3, 6, 7, 8 (V-) PoE Protocol IEEE802.3af (PoE) IEEE802.3at (PoE+) IEEE802.3af (PoE) IEEE802.