User Manual

Product Overview
1.1 Features
Common Features:
Two-layer industrial POE switch.
Conform to IEEE802.3, IEEE802.3u, IEEE802.3ab/z and IEEE802.3X standards.
MAC auto study and aging, MAC address list capacity up to 8K on 8 port model.
10/100 Base-T on all 4 port models. 10/100/1000 Base-T ports on 8 port models with self-adapt MDI/MDIX mode.
Self-adaptive RJ45 ports support IEEE802.3af, IEEE802.3at standard power supply.
Industrial wide temperature design.
Support DC48-57V power supply.
Individual Features:
4 Port Model (AMPS4E4P-AT-60)
4-port PoE switch 1*100Mbps/ self-adaptive PoE ports and 1*10/100M Uplink RJ45 ports.
Total PoE power consumption of 60W.
8 Port Model (AGPS8E8P-AT-60)
4-port PoE switch supports 4*10/100/1000 Mbps self-adaptive PoE ports and 4*10/100/1000Mbps self-adaptive RJ45 ports.
Total PoE power consumption of 60W.
8 Port Model (AGPS8E8P-AT-96)
8-port PoE switch supports 8*10/100/1000 Mbps self-adaptive PoE ports.
Total PoE power consumption of 96W.
1.2 Typical Application
The typical application of the device is shown in Figure 1- 1
5
SN Name Note
1 Link/Act, PoE Single port link / single port PoE status indicator light.
2 10/100/1000 Base-T 1*10/100/1000 Mbps self-adaptive uplink port.
3 10/100/1000 Base-T 4*10/100/1000 Mbps self-adaptive PoE ports.
4 10/100/1000 Base-T 4*10/100/1000 Mbps self-adaptive non-PoE ports.
5 PWR Power indicator light.
Sheet 2-2
2.2 8-Port PoE Switch (AGPS8E4P-AT-60)
2.2.1 Front Panel
The front panel is shown in Figure 2-2.
2.2.2 PoE Power Supply
Uplink Port: 1*10/100/1000 M RJ45 ports support IEEE802.3af, IEEE802.3at standard power supply.
PoE Ports: 4*10/100/1000 M RJ45 PoE ports support IEEE802.3af, IEEE802.3at standard power supply.
Total power consumption of PoE power supply is less than 60W.
2.2.3 Back Cover
The device power port is shown in Figure 2-4, support DC 48-57V power supply.
Device Structure
2.1 4-Port PoE Switch (AMPS4E4P-AT-60)
2.1.1 Front Panel
The front panel is shown in Figure 2-1.
2.1.2 PoE Power Output
10/100M RJ45 Ports support both IEEE802.3af, and IEEE802.3at power standards.
Supports simultaneous power to 4 ports using IEEE802.3af
Supports Simultaneous power to 2 ports using IEEE802.3a
2.1.3 Back Cover
The unit power port is shown in Figure 2-2, support DC 48-57V power supply.
Figure 2.3
DC48-57V
PWR
PoE 1 PoE 2 PoE 3 PoE 4
Link/Act PoE
Link/Act PoE Link/Act PoE Link/Act
PoE
5 6 7 8
Link/Act
Link/Act Link/Act Link/Act
1
3
5
2
4
Figure 2.2