User Guide

2
Step 3: Tap on which camera you would like to link.
Setting a Pan/Tilt Preset
Step 4: This will take you to a preset (pan/tilt) interface. This option allows you to set a pan/tilt
preset that will allow the camera to aim in a specific location once the sensor has been tripped.
To set the preset, move the pan/tilt option left, right, up, or down. Once the preset has been is
set, tap Save.
Step 5: Once the camera has been linked to the sensor you will notice a blue checkmark in the
link cameras menu. Use the back arrow to exit the interface.