User Manual

ManualsBrandsAmcrest ManualsElectronicsHome Security System, DIY Smart Home Alarm System for Home with No Monthly Fees, Remote Arm/Disarm & Phone App Alerts, 4 Pieces-Kit (PIR Motion Sensor, Door Window Sensor, Alarm Hub)

1

2

3

4

5

6

7

8

9

Pairing the Sensor

LED Behavior

Please refer to the table below for details regarding the

LED behavior of the device.

Speciﬁcations

Environment Indoor

Max Detection Distance

Less than 3/4”

Operating 14°F ~ 113°F

Operating Humidity 0-95% RH

Battery CR1632

Protocol Bluetooth 5.0

WARNING:

CHOKING HAZARD

KEEP OUT OF REACH OF CHILDREN.

!

11

12

1. Locate the Alarm Hub on

the main menu.

2. Tap on the “+” icon to pair

the sensor to the hub.

3. Follow the on-screen

prompts to finish pairing the

sensor.

4. Test the sensor by moving

the small magnetic portion

along the right side of the

sensor. The LED on the

sensor will flash once it has

detected motion.

Note: It is recommended to keep the small

magnetic portion 3/4” away from the sesnor.

Do not place the small magnetic portion

directly on the sensor.

Behavior Description

Flashing Rapidly

Solid (for 2 seconds)

Sensor is pairing.

Pairing successful

Flashing (3 times)

Pairing failed.

**Try repeating setup.

Flashing Rapidly

(after pairing)

Alarm has been triggered.

Steady Flash

Firmware upgrade.