080P Dome Outdoor HDCVI Camera AMC1080DM36-B User Manual Version 1.0.0.
Contents Welcome................................................................................................................................................................ 3 Important Safeguards and Warnings....................................................................................................................... 3 Product Introduction .............................................................................................................................................. 4 Features ...
Welcome Thank you for purchasing an Amcrest camera! This user manual is designed to be a reference tool for the installation and operation of your camera. Here you can find information about the camera’s features and functions, as well as information to aid in troubleshooting. Many of the setup and installation sections have corresponding videos on YouTube. To access the setup videos, please go to http://amcrest.com/videos.
6. Operation and Maintenance Do not touch the camera sensor or lens directly. To clean dust or dirt off the lens, use an air blower or a microfiber cloth. 7. Accessories Be sure to use only the accessories recommended by the manufacturer. Before installation, please open the package and check to make sure that all the components are present. Contact the retailer that you purchased from or Amcrest directly if anything is broken or missing in the package.
3) Using a drill bit that is the same diameter or slightly smaller diameter than the included drywall wall anchors, drill the 4 holes and insert the wall anchors into the holes. Note: The wall anchors should be in the same bag as the screws and a designed to secure the screws onto the mounting surface. 4) Attach the power cable and BNC cabling to the camera. (If you are running the cables through a mounting surface, use a 1” paddle bit to bore a hole for the cables.
Lens Audio Interface 3.6mm Angle of View H: 89.9º Mount Type M12 General Power Supply DC12V, 2.0A Power Consumption Max 2.8W Working Environment -40°C~+60°C / Less than 95%RH (no condensation) Transmission Distance Over 500m via 75-3 coaxial cable Ingress Protection IP67 Dimensions Φ93.4mm×79.7mm Weight 0.33kg Material Metal FCC Statement 1. This device complies with Part 15 of the FCC Rules.
transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. IC Warning Statement This device complies with Industry Canada’s license-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
X: Indicates that the concentration of the hazardous substance of at least one of all homogeneous materials in the parts is above the relevant threshold of the SJ/T11363-2006 standard. During the environmental-friendly use period (EFUP) period, the toxic or hazardous substance or elements contained in products will not leak or mutate so that the use of these (substances or elements) will not result in any severe environmental pollution, any bodily injury or damage to any assets.
