User Manual

6. Operation and Maintenance

Do not touch the camera sensor or lens directly. To clean dust or dirt off the lens, use an air blower or a microfiber

cloth.

7. Accessories

Be sure to use only the accessories recommended by the manufacturer. Before installation, please open the

package and check to make sure that all the components are present. Contact the retailer that you purchased from

or Amcrest directly if anything is broken or missing in the package.

Product Introduction

This series of camera is adopted with CMOS image sensors that provide high performance, high megapixel

resolution that supports 1080P video. It supports monitoring signals and audio via a coaxial transmission and

standard BNC connection and built in microphone. Transmission distances can range more than 500m (1640ft) @

1080P. This series can also support CVI/TVI/AHD/Analog output as well as recognize high speed, long distance, and

real time video transmissions.

Features

• 1/3 CMOS

• 1080P @30fps

• 2D NR, Smart IR Control

• DC12V, 2.0A

Installation

Before physically installing your camera, make sure the mounting surface can support up to 3x the weight of the

camera.

1) Remove the base portion of the camera by twisting it and remove it from the top portion of the bracket.

2) Locate the position in which you would like to place your camera and using the base of the camera, mark

the installation holes with a marker on the mounting surface. These holes will be used to drill the holes needed to

mount your camera.