080P Analog HDCVI Bullet Camera AMC1081BC36-B-V3 User Manual Version 2.0.
Contents Welcome................................................................................................................................................................ 3 Important Safeguards and Warnings....................................................................................................................... 3 Product Introduction .............................................................................................................................................. 4 Features ...
Welcome Thank you for purchasing an Amcrest camera! This user manual is designed to be a reference tool for the installation and operation of your camera. Here you can find information about the camera’s features and functions, as well as information to aid in troubleshooting. Many of the setup and installation sections have corresponding videos on YouTube. To access the setup videos, please go to http://amcrest.com/videos.
specified environments as stated above. Do not aim the camera at a strong light source as it may cause overexposure of the picture or affect the longevity of the camera’s sensors. Ensure the camera is in a well-ventilated area to prevent overheating. 6. Operation and Maintenance Do not touch the camera sensor or lens directly. To clean dust or dirt off the lens, use an air blower or a microfiber cloth. 7. Accessories Be sure to use only the accessories recommended by the manufacturer.
2) Using a drill bit that is the same diameter or slightly smaller diameter than the included drywall wall anchors, drill the 4 holes and insert the wall anchors into the holes. Note: The wall anchors should be in the same bag as the screws and a designed to secure the screws onto the mounting surface. 3) Attach the power cable and BNC cabling to the camera. (If you are running the cables through a mounting surface, use a 1” paddle bit to bore a hole for the cables.
Mount Type M12 Focal Length 3.6mm Max. Aperture F1.9 Field of View H: 84° x V: 45° x D: 100° Iris Type Fixed Iris Close Focus Distance 2.6 ft (0.8m) DORI Lens Detect Observe Recognize Identity 3.6mm 163.1ft 65.3ft 32.5ft 16.
FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 2.
de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body.
(substances or elements) will not result in any severe environmental pollution, any bodily injury or damage to any assets. The consumer is not authorized to process such kind of substances or elements, please return to the corresponding local authorities to process according to your local government statutes. Note: • To view setup videos for many of the steps outlined in this guide, go to http://amcrest.com/videos • This user manual is for reference only.
Copyright Amcrest© 2019 10
