User Guide

Change your channel (or camera) by clicking Channel and selecting from any cameras currently

added to the DVR. You can also select All. Make sure the Enable toggle switch is activated.

Then, click Setting to Region to configure the motion detection areas.

4. You can set up ‘regions’ for motion detection using the region grid on your DVR.

By default, the entire area of view for your cameras will be highlighted with red blocks. This

means that the entire field of view is active for motion detection:

Any red blocks that you click or click-and-drag to remove will not be active for motion detection.

Motion detection will not work for any portion of the screen that is clear.

If you hover your mouse pointer over the top-center edge of this window, another small window

will appear with options to configure sensitivity and threshold settings as well as to choose

from up to four regions.

Sensitivity - is the measure of how many pixels on the screen need to change before being

considered motion. 0 is the lowest value and 100 is the highest.