User Guide

Here, you can enable the live feeds for any connected cameras, control Chall, take snapshots,

use 2-way audio, view them in full screen, and more.

The next tab is the Playback tab.

Here, on the right panel, there is a calendar for you to choose which day you’d like to see footage

from, and you can choose a channel to select which camera you want to see footage from. The

timeline on the bottom allows you to play, stop, forward, etc.

Note: Keep in mind that you can see the live feeds from your cameras whether a hard drive is

installed in your DVR. However, you will need to have a hard drive installed and recordings

properly configured to view the playback.

9. References & Contact Information

To view setup videos for many of the steps outlined in this guide, go to http://amcrest.com/videos

This quick start guide is for reference only. Slight differences may be found in the user interface.

All the designs and software here are subject to change without prior written notice.

All trademarks and registered trademarks mentioned are the properties of their respective

owners.

If you have any questions or concerns, please contact us at support@amcrest.com, or call us at

888-212-7538.

FCC Statement

1. This DVR complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) this DVR may not cause harmful interference, and (2) this DVR must accept

any interference received, including interference that may cause undesired operation.

2. The user’s manual or instruction manual for an intentional or unintentional radiator shall

caution the user that changes, or modifications not expressly approved by the party responsible