Manualshelf

User Manual

ManualsBrandsAmcrest ManualsElectronics4K UltraHD 8 Channel AI DVR Security Camera System Recorder, 8MP Security DVR for Analog Security Cameras & Amcrest IP Cameras, AI Smart DVR, HDD & Cameras NOT Included (AMDV5108-AI)
101102103104105106107108109110
101
Below is an explanation of the fields on the Import/Export settings screen:
Export: Used to export device configuration files to the device.
Browse: Click this button to select the device configuration file from
Import: Click this button after the config file has been imported into the interface to import
the settings.
Default
This screen is used to revert the DVR back to its original default or factory default settings.
Below is a screenshot of the Default settings screen:
To reset specific parameters, excluding network, user management, etc. use the Default button. To
perform a factory reset, click on the Factory Default button. A prompt will be displayed, click the OK
button to begin the factory reset. The device will reboot and restored back to its original factory
settings.
Update
This screen is used to update the DVRs firmware. To conduct a system update, it is required to put an
update file onto a USB storage device and plug it into the DVR. For more information on how to
download a firmware file, please visit https://amcrest.com/firmware-subscribe
Below is a screenshot of the upgrade screen: