User Manual

27
Click to enable the camera to flip its image.
The system supports preset, tour, pattern, scan, rotate, and light functions.
Note:
Preset, tour, and pattern all need the value to be the control parameters. You can define it as you
require.
You need to refer to your camera user’s manual for the Aux definition. In some cases, it can be used for
special a process.
Aux
Click and the system goes to the following interface. The options here are defined by the protocol.
The aux number corresponds to the aux on-off button of the decoder.
Left click on the video wall interface to exit any menus in the system.
Web Operation
This device features the latest in JS technology which allows you to access your device via a wide variety
of web browsers including, Google Chrome, Firefox, Safari and other mainstream web browser via your
PC or Mac computer. However, as a primary means of accessing the web user interface for your Amcrest
device in a web browser, we highly recommend using Internet Explorer to access your device's web user
interface as most modern browsers may provide certain limitations when accessing your device via a web
browser. For more information on how to access your device from your computer please refer to the
information below.
Internet Explorer is currently the most preferred method of accessing your device on your computer from
a web browser. To access the web UI via Internet Explorer please refer to the information provided below.
Locate the IP address for your device using the Amcrest IP Config Tool. The Amcrest IP Config Tool can be
downloaded at the following web page: amcerest.com/downloads