User Manual

PTZ Menu: Used to configure PTZ presets.

For more information on how to setup a PTZ preset, if applicable, please visit: amcrest.com/support

The Search menu allows the user to view recorded data retained in the system. This includes recording

types such as regular, motion detection, (MD), Alarm, and IVS. The system will need a hard drive

installed to view recorded events.

Please refer to the following sheet for more information.

Playback Interface: The playback interface is where all searched video data will be displayed. The

interface can support 1, 4, and 9 playback windows depending on the model.

Search Type: This area allows the user to display video or snapshot events. Events from a MicroSD card

(if one is installed on the camera side) can also be selected.

From R/W HDD – Recordings or snapshots are pulled from the hard drive of the DVR.

From I/O Device – Recordings or snapshots are pulled from a MicroSD card on the camera side.

Rec – Video recordings will be pulled from either selection.

Pic – Snapshot recordings will be pulled from either selection.

Slice – Time sliced recordings can be pulled from the HDD.

Important

Redundancy HDD does not support the picture backup function, but it supports picture playback

function. You can select to play from the redundancy HDD if there are pictures on the redundancy

HDD.

Calendar – The calendar provides dates in which events have been retained in the system. If there are

any events for a specific date the data will be represented with a dot. Users can use the left and right

arrow keys to switch between months.