Manualshelf

User Manual

ManualsBrandsAmcrest ManualsElectronics4K UltraHD 8 Channel AI DVR Security Camera System Recorder, 8MP Security DVR for Analog Security Cameras & Amcrest IP Cameras, AI Smart DVR, HDD & Cameras NOT Included (AMDV5108-AI)
81828384858687888990
81
Disk
This screen allows the user to specify actions that occur when there is an abnormality with the DVR’s
hard disk drive (HDD). Below is a screenshot of the HDD abnormality settings screen:
Below is an explanation of the fields on the HDD abnormality settings screen:
Event Type: This field allows the user to specify which HDD abnormality event type they would like to
configure settings for.
No Disk: No hard drive is detected.
HDD Error: The hard drive has an error.
HDD No Space: The hard drive is about to or has run out of space.
Enable: This option allows the user to enable the features below for the specified event type.
Alarm Tone: Check this box to enable an imported voice prompt to be used if an event occurs. To use
this feature, select a file from the dropdown box in the File Name section.
More: Allows the user to access other detection options.
Show Message: This checkbox allows the user to enable the system to show an on-screen
message when an HDD abnormality occurs.
Buzzer: Check this box to enable a buzzer to be sound on your device if an event occurs.
Report Alarm: This option allows the system to upload the alarm signal to the network
(including alarm if you enabled current function).
Log: Check this box to enable a log of the abnormality to be retained into the system.
Send Email: This checkbox allows the user to enable the system to send an email when a motion
detection alarm is triggered.
To refresh the page, click the Refresh button. To save the settings click the OK button.
Network
This screen allows the user to specify actions that occur when there is an abnormality with the DVR’s
network connection. Below is a screenshot of the network abnormality settings screen: