User Manual

82
Below is an explanation of the fields on the Network abnormality settings screen:
Event Type: This field allows the user to specify which Network abnormality event type they would like
to configure settings for.
Offline: The network connection has been disconnected.
IP Conflict: There is a device on the network with the same IP address.
MAC Conflict: There is a device on the network with the same MAC address.
Enable: This option allows the user to enable the features below for the specified event type.
Record Channel: This checkbox allows the user to enable the system to record video for that channel
when a motion detection alarm is triggered. Delay is also associated with this tab; it is the This field
specifies in seconds how long the delay between alarm activation and recording should be.
Alarm Tone: Check this box to enable an imported voice prompt to be used if an event occurs. To use
this feature, select a file from the dropdown box in the File Name section.
Show Message: This checkbox allows the user to enable the system to show an on-screen message
when an abnormality occurs.
Buzzer: Check this box to enable a buzzer to be sound on your device if an event occurs.
Log: Check this box to enable a log of the abnormality to be retained into the system.
Voice Prompts: Check this box to enable an imported voice prompt to be used if an event occurs. To use
this feature, select a file from the dropdown box in the File Name section.
More: Allows the user to access other detection options.
Show Message: This checkbox allows the user to enable the system to show an on-screen
message when an HDD abnormality occurs.
Buzzer: Check this box to enable a buzzer to be sound on your device if an event occurs.
Log: Check this box to enable a log of the abnormality to be retained into the system.
Send Email: This checkbox allows the user to enable the system to send an email when a motion
detection alarm is triggered.
To refresh the page, click the Refresh button. To save the settings click the OK button.