User Manual

31
Below is a description of the
Channel: In the Channel list, select the channel that you want to configure.
Cable Type: In the Cable Type list, select the cable type that the camera uses.
Period: In the Period list, select a time period for the image settings. The image settings will be only used
during the selected period.
Effective Time: Enable the effective function. In the Effective Time box, enter the start time and end time
for the period you selected.
Brightness: Adjusts the image brightness. The bigger the value is, the brighter the image will become. You
can adjust this value when the image looks dark or bright. However, the image is likely to become dim if
the value is too big. The value ranges from 0 to 100. The default value is 50. The recommended range is
between 40 and 60.
Contrast: Adjusts the image contrast. The bigger the value is, the more obvious the contrast between the
light area and dark area will become. You can adjust this value when the contrast is not obvious. However,
if the value is too big, the dark area is likely to become darker and the light area over exposed. If the value
is too small, the image is likely to become dim. The value ranges from 0 to 100. The default value is 50.
The recommended range is between 40 and 60.
Saturation: Adjusts the color shades. The bigger the value, the lighter the color will become. This value
does not influence the general image lightness. The value ranges from 0 to 100. The default value is 50.
The recommended range is between 40 and 60.
Hue: Adjusts the hue of image. The value ranges from 0 to 100. The default value is 50.
Sharpness: Adjusts the sharpness of image edge. The bigger the value is, the more obvious the image
edge, and the noise is also greater. The value ranges from 1 to 15. The default value is 1.