User Manual

ManualsBrandsAmcrest ManualsComputers & Accessories5-Port PoE+ Power Over Ethernet Poe Switch

4/8-Port PoE Switch

User’s Manual Version 1.0.3

Simple. Reliable. Secure.

AMPS9E8P-AT-96

AMPS5E4P-AT-65

Summary of content (9 pages)

PAGE 1
Simple. Reliable. Secure. AMPS5E4P-AT-65 AMPS9E8P-AT-96 4/8-Port PoE Switch User’s Manual Version 1.0.
PAGE 2
Important Safeguards & Warnings Attention: Please read the following safeguards and warnings carefully before using the product in order to avoid damages and losses. Note: Do not expose the device to Soot, high humidity or dust. Doing so may cause fire or electric shock. Do not install the device in direct sunlight as it may cause overheating and failure. Installation of the unit should be via the compatible rack mount or securely on a flat surface.
PAGE 3
Table of Contents 1 1.1 1.2 Product Overview Features Typical Application 3 3 3 2 2.1 2.1.1 2.1.2 2.1.3 Device Structure 4-Port PoE Switch Front Panel Back Panel PoE Power Output 4 4 4 4 5 2.2 2.2.1 2.2.2 2.2.
PAGE 4
3 Product Overview 1.1 Features Common Features: Two-layer commercial PoE switch. Conform to IEEE802.3, IEEE802.3i, IEEE802.3u and IEEE802.3X standards. MAC auto study and aging, MAC address list capacity is 2K. All ports self-adapt MDI/MDIX mode. All the10/100M self-adaptive RJ45 PoE ports support IEEE802.3af and IEEE802.3at standards. Commercial wide temperature design. Supports DC 52V 1.25A power supply.
PAGE 5
4 Device Structure 2.1 4-Port PoE Switch 2.1.1 Front Panel The front panel is shown in Figure 2-1. 1 Figure 2.1 SN Name Note 1 Ethernet Ports 4 10/100M self-adaptive RJ45 PoE ports. 1 UpLink Port. Sheet 2-1 2.1.2 Back Panel The back panel is shown in Figure 2-2. 2 1 3 Figure 2.
PAGE 6
5 SN Name Note 1 Power/PoE Max Indicates the switch is powered on and if the maximum PoE power available is used. 2 Ground Used as grounding option for the switch. 3 DC Power connection port. Supports 52V 1.25A Sheet 2-2 2.1.3 PoE Power Output 10/100M RJ45 PoE Ports support IEEE802.3af and IEEE802.3at power standards. Supports simultaneous power to 2 ports using IEEE802.3t and 4 ports using IEEE802.3af. Total power draw cannot be over 65W. 2.2 8-Port PoE Switch 2.2.
PAGE 7
6 2.2.2 Back Panel The back panel is shown in Figure 2-4. 1 2 3 4 5 6 Figure 2.4 SN Name Note 1 PWR Indicates the switch is powered on. 2 9(Uplink) Port Status LED. Blinking – data transmitting. Solid – link established. Off – no connection. 3 1, 2, 3, 4, 5, 6, 7, 8 Port Status LEDs. Blinking – data transmitting. Solid – link established. Off – no connection. 4 PoE Status This row of LEDs indicates if PoE is being used.
PAGE 8
7 Appendix 1 Technical Specification TECHNICAL PARAMETERS AMPS5E4P-AT-65 AMPS9E8P-AT-96 1*10/100 Base-T (UpLink) 1*10/100 Base-T (UpLink) 4*10/100 Base-T (POE powered) 8*10/100 Base-T (POE powered) Exchange Capacity 1.0Gbps 1.8Gbps Packet Forwarding Rate 0.74Mpps 1.