User Manual

5
Device Overview
The image below shows the structure of the camera:
The images below show the dimensions for the camera. The measurements are in millimeters
(mm):
To access the reset button and to adjust the camera angle, use the included Torx/Hex wrench. The reset button
and microSD card slot can be accessed by removing the 2 screws located on the security hatch on the bottom of
the camera.
For reference, a Torx/Hex screwdriver tip looks like this:
Connection & Installation
This section provides information about the connection and installation of your camera.
Installation Guide
Follow the steps and use the diagram in this section to install your camera.
Note: Prior to installation ensure that the installation environment can support at least 3 times the weight of the
camera.