User Manual

43
Below is an explanation of the features listed in this menu:
Preset: A preset must be added to set a smart plan for Deep IVS or if multiple smart plans need to be applied to
the system. To begin adding a preset to your camera, click the Add button. To refresh the screen click Refresh, to
delete a preset, press Delete or to remove all the presets, click Remove All. Please note a Tour: Allows the user to
string multiple presets together.
Scan: Allows the user to set automatic scan presets to the camera.
Pattern: Allows the user to set specific PTZ pattern presets to the camera.
Pan: Allows the user to adjust pan speeds related to established pan presets.
PTZ Speed: Allows the user to adjust pan, tilt, and zoom speeds. There are 3 separate PTZ speeds for this function:
Low, Middle, and High.
Idle Motion: Allows the user to set intervals of idle time before the preset quits. The idle time can be set from 1 ~
60 minutes.
Power Up: Allows the user to set the device to automatically enable certain presets, such as tours, scans, etc. to
initiate once the camera has been powered on.
PTZ Limit: Allows the user to set a specific area in which the PTZ move. This is possible by setting a Up and Down
line on the interface.
Time Task: Allows the user to set scheduled periods for PTZ presets to occur. To set a schedule, click the Enable
check box and select the time task action from the Task Set action menu. If you want the time task to
automatically return to a specific position in a certain period of time, enter the value in the Auto Home field. This
option is set to default every 30 seconds; however, this can be adjusted from 5 ~ 3600 seconds. Once this value is
set, click the Scheduled button: