User Manual

67
Clear: This option is used to clear any face detection areas currently set.
Exclude Region: This option is used to set an area in which the face detection rule will not apply.
Clear: This option is used to clear any excluded face detection areas.
Target Filter: This option allows the user to set a maximum and minimum size of the target area. By default, this
option will be set to the max resolution, however, it can be manually adjusted.
Draw Target: Allows the user to set a target area on the live monitor screen.
Clear: Clears the modified target area to draw the target area on the live monitoring screen.
Pixel Counter: Used to measure and set the number of pixels in the target area on the live monitoring screen.
To reset to default settings, click the Reset Defaults button. To refresh the page, click the Refresh button. To save
the settings, click the Save button.
Picture
This menu allows the user to customize snapshot descriptions for different video metadata types. Below is a
screenshot of this menu.
Below is description of the features in this menu:
Time/Location: Click and use your mouse to select which order the time or location will be displayed in the
snapshot description.
Type: Use this dropdown menu to select a video metadata type that will be
Time: Enable the date and time in the snapshot description.
Location: Customize a location that will be displayed in the snapshot description.
Vehicle Body Picture: Enable this checkbox to allow a vehicle body snapshot to be uploaded when detected.
To reset to default settings, click the Reset Defaults button. To refresh the page, click the Refresh button. To save
the settings, click the Save button.