User Guide

ManualsBrandsAmcrest ManualsElectronics1080p POE NVR (4CH 1080p/3MP/4MP/5MP/6MP) Network Video Recorder - Supports up to 4 x 1080p (2.1MP) POE IP Cameras @ 30fps Realtime, Supports up to 6TB HDD (Not Included) and More

Hardware Setup Setting up the cable connections

8

5. Connect the NVR’s power pin (attached to the brick) into the power port on the back of

the NVR.

6. Then, take the power plug and connect it to the brick on one end.

7. Finally, connect the other end of the power cable into a wall outlet or power strip. Your

NVR can now be powered on. Press the power button on the front panel.