User Guide

Console Setup Adding ONVIF cameras
21
Adding ONVIF cameras
Using ONVIF cameras or adding cameras with the ONVIF protocol can be a very efficient way of
using older or outdated cameras. In addition, using ONVIF also makes it easy to consolidate
cameras from different manufacturers all onto the same NVR because ONVIF is an industry
standard that can allow that kind of cross-compatibility.
The below steps should be followed after all steps in the above Using the device search
method process have been followed and completed.
1. Once your device has been added to the Added Device table, click the pencil
icon under Modify:
This will take you to the Modify page.
2. Click the down arrow next to Manufacturer and select Onvif from the dropdown: