User Guide

Front/Back Panel Diagrams & Descriptions Front Panel
1
1. Front/Back Panel Diagrams & Descriptions
Front Panel
Note: For detailed operating instructions, please refer to the User’s Manual on the included CD
or found on the product listing online: http://amcrest.com/ip-security-camera-systems.html/
The front panel is shown in Figure 1.
Figure 1
Please refer to the following chart for information on the front panel buttons
#
Icon
Name
Function(s)
1
ALARM
Alarm status
indicator light
When an alarm event occurs, this LED becomes
blue to alert you.
2
REC
Recording status
indicator light
When the NVR is recording footage to the hard
drive, this LED will become blue to alert you.
3
HDD
HDD status
indicator light
When an HDD error occurs or the HDD capacity is
below the specified threshold, this LED becomes blue
to alert you.
4
NET
Network status
indicator light
When a network error occurs or there is no network
connection, this LED becomes blue to alert you.
5
ACT
ENTER
Confirms the current operation.
6
POWER
Power status
indicator light
When the NVR is powered on, this LED will remain
blue.
7
Power button
Press and hold the power button for 3 seconds to boot
up or shut down the NVR.
8
🔺 / 🔻
Up/Down
Activates current controls, modifies settings, and
allows navigating up and down through options.
Increases/Decreases numerals.
Assists in functions such as PTZ menu.
9
< / >
Left/Right
Shifts current activated controls.
When in playback, use these buttons to control the
playback bar.
10
ENTER
Enter
Confirms the current operation.
Goes to the default button.