User Manual

30
Note: Adjusting the bitrate to anything lower than the recommended bitrates above may result
in degradation to recordings or to live view. For best results, if you are adjusting multiple
cameras, it is highly recommended to adjust each camera individually. This may be a trial
and error process since most network environments are unique and may vary, however, the
bitrate should range between 1792-2048 Kb/S if using a 4K camera. An optimal customized
bitrate should be around 1825 Kb/S. Click Apply to save the new bitrate settings.
Video Wall
Please note the displayed window amount may vary depending on how many channels your NVR can
support. The following figure is for reference only.
Please note, the video wall menu will also provide a separate portion that will display the current bit
rate of each channel. The bitrate for each device is measured in Kb/S. For more details on bitrate and its
relation to the NVR, please refer to the section
1
Recording status
3
Direct PoE Connection
2
Motion detection
4
Camera lock
Preview Control Interface