User Guide

28
Adjusting Motion Detection Schedules
Motion detection schedules work the same as the schedules outlined in section: “Setting Up
Recording Schedules.” To adjust a motion detection schedule, click on Period and use your
mouse to adjust the timeline. Click on the settings (gear) icon to set multiple periods. Click on
Save to save your schedule.
3. Click on the “Send Email” checkbox. To enable the NVR to send an email once a motion is
detected.
4. Click on Apply to save the settings to your system.
Once you have set up your settings for one channel, you can copy them to other channels in the
system. If you did not select All after clicking Channel as previously described, click Copy,
select channels to copy to, then click Save.
Click Save to save all the settings made on this page. Click Apply in the Motion Detect menu to
finish saving your motion detection settings to your device.
Setting Up AI Events
The features listed in the AI menu include Face Detection, Face Recognition, IVS, People
Counting and Heat Map. The NVR allows you to access stored AI events via a Smart Search,
option located in the AI menu, or via the playback menu depending on which feature is being
used in the system. Certain AI features such as, face recognition, heat map or other related
features may only be available to view via the AI Smart Search menu. Some features may only
be available if the camera you are using supports those specific AI functions. To begin
setting up AI events, click on the AI option available in the main menu.