User Guide

30
Setting Up Face Detection
Face detection is used to allow your device to detect face events. This feature can be used either
by the NVR or by the camera (if supported). For more information on setting up face detection,
please refer to the information provided below.
1: Access the Smart Plan menu and select the channel you would like to configure from the
Channel drop down menu. Click on the Face Detection icon and then click Apply. If using a
non-AI camera, a smart plan may not be available for the specific channel.
2. Click on the Face Detection menu located in the Parameters section and select which
channel to configure from the Channel drop down menu. Next, choose which face detection type
you will be using from the Type drop down menu. In this example we will be using AI by Device,
however, you can choose AI by Camera to use the camera’s built-in face detection settings, if
applicable. Enable the face detection toggle switch.