User Guide

33
Using Face Recognition
Face recognition is used in conjunction with face detection to locate and determine facial
similarities detected by the system. Images are registered in a face library, by the user, and
accessed via a face recognition smart search tool that is built into the NVR. A USB flash drive
with applicable images (in jpeg format) should be inserted into a USB port on the NVR if
you are importing images locally.
1. Ensure Face Detection is enabled in the Smart Plan menu. Click Apply
2. Click on the Face Recognition option in the Parameters menu and verify the correct channel
(camera) is being used. Click on the Enable toggle switch to enable the feature. Click on Apply.
3. Click on the Database option located in the AI menu and click on Add to begin registering
images to a face library. A face library must be registered for this feature to function
properly. Enter a name for your face library and click Save.
The library will now be saved to the database. Click on the Details section to begin adding
images into the to the face library.