User Guide

34
If you have a single image to add click Register ID, if you have multiple images to add click on
Batch register. Follow the on-screen prompts to add the images into the library. Once the
images have been successfully modeled into the database left click on the interface to exit.
4. Navigate back to the Face Recognition menu in the Parameters section and click on the
Setting option in the Target Face Database field. Select the face library you just created and
click Save to insert the library of registered images into the interface.
5. Select an AI mode from the AI Mode drop down menu. Common Mode allows the device to
use the images registered in the face library as a reference. Enabling the Stranger Alarm will
alert the system once an unrecognized face is detected. Click Apply to save the settings to your
system.