User Guide

37
2. Click on the IVS option located in the Parameters menu and verify the correct channel is
being used. If you are using AI features available on the camera side, select AI by Camera, in
this example we will be using AI by Device to highlight key features of the NVR. Click Add to
add an IVS rule.
IVS Features Available by Device.
Any camera, whether AI or non-AI, connected to the NVR can take advantage of the NVRs built-
in AI features, including IVS. For more information on the built-in IVS features please refer to the
information provided below.
Tripwire: Allows the device to trigger an event if an object, such as a human or vehicle, crosses
a set tripwire line.
Intrusion: Allows the device to trigger an event if an object, such as a human or vehicle, appears
or crosses a set intrusion area.
Note: For more information about the AI features available on your device, please consult the full
user manual for your specific model camera or visit: https://amcrest.com/support
3. Click on the Type drop down menu to select an available IVS rule. Once a rule is selected,
click on the Draw (pencil) icon, to begin configuring the rule.