User Guide

38
4. Use your mouse to draw an area or line on the interface. Click on the interface and use your
mouse to draw an area or line, click your mouse on the interface when done, then right click to
set the area or line to the system.
If you would like to add a name for the rule, enter a name in the Name box. The Direction drop
down menu allows you to choose a direction in which the rule will be triggered. Object filters can
be enabled for accuracy. Click Save.
The Target Filter option is used to set a minimum or maximum detection area. It is recommended
to leave this as default; however, it can be modified. Use the Clear (trash can) icon to remove a
drawn area or line. The AI Recognition toggle switch enables object filtering options that allow
you the ability to determine if a human or vehicle has entered the area. If Person is chosen, the
rule will only be triggered if a human figure is detected. If Vehicle is chosen, the rule will only be
triggered if a vehicle is detected by the system. Both object filtering options can be used
simultaneously if needed.
5. If you would like to add multiple rules to the device, click on Add and repeat the IVS setup
process for the rule. Click Apply once all IVS rules are set.
Use the Trigger (gear) icon to apply any additional settings to an IVS rule, such as enabling email
snapshots, etc. To delete an IVS rule, click on the delete (trash can) icon.