User Guide

2. Click on the People Counting option located in the Parameters menu. Ensure the correct

channel is being used and click on the Enable toggle switch to enable the feature. Click Apply.

3. To update any information regarding people counting. Click on the RULE button located in the

Rule field of the interface. It is best to leave this area as default; however, you can modify the

name, direction, or target filtering of the feature. Target filtering allows you to modify the

detection area based on a minimum and maximum setting on the screen. Right click on the

interface to exit.

4. Use the interface to apply any additional settings such as, sending an email snapshot of the

event (“Send Email”), etc. Click Apply when finished.