Manualshelf

User Guide

ManualsBrandsAmcrest ManualsElectronics4K 8-Channel AI NVR (8-Port PoE) Smart NVR, Facial Recognition, Facial Detection & Vehicle Detection - Supports 8 x 4K IP Cameras, Supports up to 2 x 8TB Hard Drives (Not Included)
12345678910
5
Rear Panel
The rear panel of the NVR may differ model to model. Below is a representation of the rear panel
for the NV42XX-AI Series.
Non-PoE ports
PoE Ports.
USB 2.0 port
USB 2.0 port. Connect a mouse, USB storage device, etc.
Network port
10M/100Mbps self-adaptive Ethernet port.
HDMI Output
High definition audio and video signal output port.
VGA video
output port
VGA video output port. Outputs analog video signal. This
connects to the monitor to view analog video.
GND
Ground end
Power Port
DC12V, DC48V Depending on model.
Audio input port
Bidirectional talk input port. This is used to receive the analog
audio signal from the device such as a microphone.
Audio output
port
Audio output port. This is used to output the analog audio
signal to devices such as an external RCA speaker.
Bidirectional talk output.
Audio output on 1-window video monitoring.
Audio output on 1-window video playback.
PoE ports
Built-in switch on certain compatible devices.
For PoE series products, you can use this port to provide
power to a PoE camera.
Hardware Setup
Before setting up the NVR, you will need the following items. These items may not be included:
● A computer monitor or TV with either an HDMI or VGA input
● A power strip with room for 4 large power plugs
● A hard drive for storing video recordings.
● A USB flash drive formatted to FAT 32 for importing/exporting configure or image files.