Manualshelf

User Manual

ManualsBrandsAmcrest ManualsElectronics4K 8-Channel AI NVR (8-Port PoE) Smart NVR, Facial Recognition, Facial Detection & Vehicle Detection - Supports 8 x 4K IP Cameras, Supports up to 2 x 8TB Hard Drives (Not Included)
101102103104105106107108109110
107
Using Face Recognition
There are 2 methods of face recognition, common mode, and stranger mode. Common mode
allows the device to use the images registered in the face library as a reference to recognize
faces. Stranger mode will alert the system once an unrecognized face is detected.
Note: Common mode can only be setup locally on the NVR or by using Internet Explorer on a PC.
If using Face Recognition on other browsers, such as Google Chrome or Firefox, please use
Stranger Mode.
How to Use Common mode
1. In the Parameters section, access the Smart Plan menu and click on the Face Detection option. Please
note, the Face Detection option cannot be used simultaneously with other AI smart plans. Click Apply.
Note: If using a non-AI camera, a smart plan may not be available for the specific channel.
2. Click on the Face Recognition option located in the Parameters section. Click Enable to enable face
recognition. Click Apply to save.