User Manual

135
Video Detection
The detect tab allows users to set Motion Detection, Video Masking, and Video Loss events for their
system.
Tips:
The motion detection icon will be present if the motion detection alarm has been triggered on the
current channel.
To set the motion detection region, click and drag the mouse over the region desired. Once the
region has been set, click the Apply button to save the current region setup, and right click on the
mouse to exit the motion detection interface.
Motion Detect
The motion detection settings screen is where motion detection can be setup for each individual channel.
Based on the active motion detection region, the NVR can generate a motion detection alarm when a
moving signal is detected in a specified area. Below is a screenshot of the motion detection settings
screen:
Below is a description of the fields on the Motion Detection settings page: