Manualshelf

User Manual

ManualsBrandsAmcrest ManualsElectronics4K 8-Channel AI NVR (8-Port PoE) Smart NVR, Facial Recognition, Facial Detection & Vehicle Detection - Supports 8 x 4K IP Cameras, Supports up to 2 x 8TB Hard Drives (Not Included)
141142143144145146147148149150
147
Event Type: This field allows the user to specify which Network abnormality event type they would like
to configure settings for.
Net Disconnection: The network connection has been disconnected.
IP Conflict: There is a device on the network with the same IP address.
MAC Conflict: There is a device on the network with the same MAC address.
Enable: This option allows the user to enable the features below for the specified event type.
Show Message: This checkbox allows the user to enable the system to show an on-screen message
when an abnormality occurs.
Buzzer: Check this box to enable a buzzer to be sound on your device if an event occurs.
Log: Check this box to enable a log of the abnormality to be retained into the system.
Voice Prompts: Check this box to enable an imported voice prompt to be used if an event occurs. To use
this feature, select a file from the dropdown box in the File Name section.
To save the settings click the Apply button.
User
This screen allows the user to specify actions that occur when illegal login has been attempted on their
device. Below is a screenshot of this menu:
Below is a description of the features listed in this menu:
Event Type: Sets the type of event that is being triggered by the abnormality.
Enable: Check this box to enable this feature.