Manualshelf

User Manual

ManualsBrandsAmcrest ManualsElectronics4K 8-Channel AI NVR (8-Port PoE) Smart NVR, Facial Recognition, Facial Detection & Vehicle Detection - Supports 8 x 4K IP Cameras, Supports up to 2 x 8TB Hard Drives (Not Included)
151152153154155156157158159160
156
Default
This screen is used to revert the NVR back to its original default or factory default settings.
Below is a screenshot of the Default settings screen:
There are six different settings that can be reset to default settings: Camera, Network, Event, Storage,
and System settings. All these settings can be reset by the use of the All check box.
The following settings are also reset with a factory reset:
System Menu Color
Language
Time Display Mode
Video Format
IP Address
User Accounts
To perform a factory reset, click on the Factory Default button. A prompt will be displayed, click the OK
button to begin the factory reset. The device will reboot and restored back to its original factory
settings.
Upgrade
This screen is used to update the NVRs firmware. To conduct a system update, it is required to put an
update file onto a USB storage device and plug it into the NVR. For more information on how to
download a firmware file, please visit https://amcrest.com/firmware-subscribe
Below is a screenshot of the upgrade screen: