User Manual

34
NETWORK: Review and edit TCP/IP, connection, DDNS, Email settings, etc (e.g. P2P, UPnP,
Multicast, etc.)
STORAGE: Set motion detection IVS schedules, as well as access the hard drive management
interface, FTP, etc.
SYSTEM: Review and edit general system settings such as, video standards, date & time, as well
as adjust firewall settings.
ACCOUNT: Add or remove shared user settings, groups, as well as ONVIF users. Reset security
questions and update reset password email.
Camera
Remote Device
This section can also be labeled as Camera in some models. To access the Remote (camera) section, click
on the main menu and in the Settings menu click on Camera.
The first tab will be the remote tab. In this menu you can search or manually start adding cameras to the
NVR. Below is a screenshot of this tab:
In this menu you can view the device status, firmware version, as well to update firmware for your
remote device. To begin adding a device, click the Device Search button, and you can view the searched
IP addresses at the top pane of the interface. Double click an IP address or check one IP address and
then click the Add button to add the current device to the bottom pane of the interface. The system
supports batch adding.