Manualshelf

User Manual

ManualsBrandsAmcrest ManualsElectronics4K 8-Channel AI NVR (8-Port PoE) Smart NVR, Facial Recognition, Facial Detection & Vehicle Detection - Supports 8 x 4K IP Cameras, Supports up to 2 x 8TB Hard Drives (Not Included)
41424344454647484950
50
Snapshot
This tab allows for the selection of snapshot settings. See below for a screenshot of the Snapshot tab:
Below is a list of snapshot settings that can be modified on this screen:
Snapshot: This dropdown box allows the user to select a snapshot mode. There are two snapshots
Mode: There are 2 snapshot modes, regular and trigger. Regular will allow the feature to retain
snapshots continuously, trigger mode will allow a snapshot to be retained when an event occurs.
Image Size: This dropdown box allows the user to select an image size. This may be unavailable (grayed
out) on certain models.
Image Quality: This dropdown box allows the user to select image quality. Quality is adjusted on a scale
between 1, being the lowest quality and 6 being the highest quality.
Interval: This dropdown allows the user to select the snapshot interval. The value ranges from 1 to 7
seconds. The maximum setting for a customized interval is 3600s/picture.
To revert to default settings, click the Default button near the bottom left hand corner. Press the
Refresh button to refresh the interface. To confirm settings, click the Apply button near the bottom
right hand corner. Click the Back button to exit the interface.
Cam Name
This screen is used to modify the channel names for a connected device. Each field supports a maximum
of 31 characters.