User Manual

113
Intrusion: Allows the device to trigger an event if an object, such as a human or vehicle,
appears or crosses a set intrusion area.
Setting an IVS Rule
Use your mouse to draw an area or line on the interface. Click on the interface and use your mouse to
draw an area or line, click your mouse on the interface when done, then right click to set the area or line
to the system.
If you would like to add a name for the rule, enter a name in the Name box. The Direction drop
down menu allows you to choose a direction in which the rule will be triggered. Object filters
can be enabled for accuracy. Click Save.
The Target Filter option is used to set a minimum or maximum detection area. It is recommended
to leave this as default; however, it can be modified. Use the Clear (trash can) icon to remove a
drawn area or line. The AI Recognition toggle switch enables object filtering options that allow
you the ability to determine if a human or vehicle has entered the area. If Person is chosen, the
rule will only be triggered if a human figure is detected. If Vehicle is chosen, the rule will only be
triggered if a vehicle is detected by the system. Both object filtering options can be used
simultaneously if needed.
If you would like to add multiple rules to the device, click on Add and repeat the IVS setup
process for the rule. Click Apply once all IVS rules are set.