User Manual
132
5. Set the Alarm trigger type.
Normally Closed: (NC) A Trigger that initiates when an object disrupts the communication line of 2
sensors.
Normally Open (NO): A Trigger that initiates when an object completes the communication line of 2
sensors.
6. Configure the alarm trigger settings. Click Apply.
▪ Show Message: An alert will appear on the display attached to the system when the alarm is
triggered.
▪ Record Channel: Configure the alarm to trigger recording on a specific channel, or all.
▪ Send Email: A Snapshot will be taken and sent to an email address if one is setup in the system.