Manualshelf

User Manual

ManualsBrandsAmcrest ManualsElectronics4K 16CH AI NVR, Smart NVR, Facial Recognition, Facial Detection & Vehicle Detection - Supports 16 x 4K IP Cameras, Supports 2 x 8TB Hard Drives (Not Included) (No PoE Ports Included)
131132133134135136137138139140
139
Tour: Allows the user to enable the camera to activate a PTZ tour when a motion detection alarm is
triggered.
Snapshot: Allows the user to enable the camera to take a snapshot when a motion detection alarm is
triggered.
Voice Prompts: Allows the user to customize voice prompts for motion detected events.
Show Message: This checkbox allows the user to enable the system to show an on-screen message
when a motion detection alarm is triggered.
Send Email: This checkbox allows the user to enable the system to send an email when a motion
detection alarm is triggered.
Tour: Allows the user to enable the camera to activate a PTZ tour when a motion detection alarm is
triggered.
Buzzer: Check this box to enable a buzzer to be sound on your device if an event occurs.
Log: Check this box to enable a log of the abnormality to be retained into the system.
Picture Storage: When an alarm occurs, the NVR triggers a snapshot for the selected channel.
Voice Prompts: Check this box to enable an imported voice prompt to be used if an event occurs. To use
this feature, select a file from the dropdown box in the File Name section.
To reset to default settings, click the Default button. To refresh the page, click the Refresh
button. To save the settings click the Apply button.
Video Loss
The video loss settings screen is where the NVR can be setup to notify the user any time there is video
loss on any of the channels. Below is a screenshot of the video loss settings screen: