User Manual

143
Below is a description of the features in this menu:
Channel: The channel dropdown menu is used to select which channel you would like to use to set your
motion detection.
Input Abnormal: Interprets if an audio input is abnormal, such as clipping audio, etc.
Intensity Change: Interprets if the intensity value surpasses the set threshold; it can record, send a
snapshot, and an alarm according to the result.
Sensitivity:
Threshold:
Period: This setup button takes the user to the motion detection period settings screen. Below is a
screenshot of the motion detection period settings screen.
Alarm Out: Click Setting to display setting interface.
General Alarm: Enable alarm activation through the alarm NVR connected to the selected
output port.
Alarm Out: Enable an alarm channel in which an external alarm is connected.
Latch: Set a length of time that will delay turning off alarms after the external alarm is cancelled. The
value ranges from 0 seconds to 300 seconds, and the default value is 10 seconds. If you enter 0, there
will be no delay.
Show Message: This checkbox allows the user to enable the system to show an on-screen message
when a motion detection alarm is triggered.
Alarm Upload: This checkbox allows the user to enable the system to upload alarm information when a
motion detection alarm is triggered.