Manualshelf

User Manual

ManualsBrandsAmcrest ManualsElectronics4K 16CH AI NVR, Smart NVR, Facial Recognition, Facial Detection & Vehicle Detection - Supports 16 x 4K IP Cameras, Supports 2 x 8TB Hard Drives (Not Included) (No PoE Ports Included)
141142143144145146147148149150
144
Send Email: This checkbox allows the user to enable the system to send an email when a motion
detection alarm is triggered.
Delay: This allows the user to set a delay between masking events measured in seconds.
Record Channel: This checkbox allows the user to enable the system to record video for that channel
when a motion detection alarm is triggered. Delay is also associated with this tab; it is the This field
specifies in seconds how long the delay between alarm activation and recording should be.
PTZ Activation: Allows the user to active PTZ functionality to applicable PTZ devices.
Post Record: This allows the user to set a delay between masking events measured in seconds.
Tour: Allows the user to enable the camera to activate a PTZ tour when a motion detection alarm is
triggered.
Buzzer: Check this box to enable a buzzer to be sound on your device if an event occurs.
Log: Check this box to enable a log of the abnormality to be retained into the system.
Picture Storage: When an alarm occurs, the NVR triggers a snapshot for the selected channel.
Voice Prompts: Check this box to enable an imported voice prompt to be used if an event occurs. To use
this feature, select a file from the dropdown box in the File Name section.
To reset to default settings, click the Default button. To refresh the page, click the Refresh
button. To save the settings click the Apply button.
Abnormality
This screen is used to specify system action in the case of either hard drive abnormality, or network
abnormality.
Below is a screenshot of the Abnormality screen: