Manualshelf

User Manual

ManualsBrandsAmcrest ManualsElectronics4K 16CH AI NVR, Smart NVR, Facial Recognition, Facial Detection & Vehicle Detection - Supports 16 x 4K IP Cameras, Supports 2 x 8TB Hard Drives (Not Included) (No PoE Ports Included)
141142143144145146147148149150
145
HDD
This screen allows the user to specify actions that occur when there is an abnormality with the NVR’s hard
disk drive (HDD). Below is a screenshot of the HDD abnormality settings screen:
Below is an explanation of the fields on the HDD Abnormality settings screen:
Event Type: This field allows the user to specify which HDD abnormality event type they would like to
configure settings for.
No HDD: No hard drive is detected.
HDD Error: The hard drive has an error.
HDD No Space: The hard drive is about to or has run out of space.
Enable: This option allows the user to enable the features below for the specified event type.
Alarm Out: Click Setting to display setting interface.
General Alarm: Enable alarm activation through the alarm NVR connected to the selected
output port.
Alarm Out: Enable an alarm channel in which an external alarm is connected.
Latch: Set a length of time that will delay turning off alarms after the external alarm is cancelled. The
value ranges from 0 seconds to 300 seconds, and the default value is 10 seconds. If you enter 0, there
will be no delay.