Manualshelf

User Manual

ManualsBrandsAmcrest ManualsElectronics4K 16CH AI NVR, Smart NVR, Facial Recognition, Facial Detection & Vehicle Detection - Supports 16 x 4K IP Cameras, Supports 2 x 8TB Hard Drives (Not Included) (No PoE Ports Included)
141142143144145146147148149150
148
Attempt(s): Refers to the number of login attempts tried before the abnormality is triggered.
Lock Time: How long the device will be locked until another login attempt can be made.
Alarm Out: Click Setting to display setting interface.
General Alarm: Enable alarm activation through the alarm NVR connected to the selected
output port.
Alarm Out: Enable an alarm channel in which an external alarm is connected.
Latch: Set a length of time that will delay turning off alarms after the external alarm is cancelled. The
value ranges from 0 seconds to 300 seconds, and the default value is 10 seconds. If you enter 0, there
will be no delay.
Send Email: This checkbox allows the user to enable the system to send an email when a motion
detection alarm is triggered.
Buzzer: Check this box to enable a buzzer to be sound on your device if an event occurs.
Log: Check this box to enable a log of the abnormality to be retained into the system.
Voice Prompts: Check this box to enable an imported voice prompt to be used if an event occurs. To use
this feature, select a file from the dropdown box in the File Name section.
To save the settings click the Apply button.
Device
This screen allows the user to specify actions that occur if the device encounters a network
security exception.
Below is a screenshot of the Device abnormality menu: