User Manual

149
Below is a description of the features provided in this menu:
Event Type: Sets the type of event that is being triggered by the abnormality.
Enable: Check this box to enable this feature.
Attempt(s): Refers to the number of login attempts tried before the abnormality is triggered.
Lock Time: How long the device will be locked until another login attempt can be made.
Alarm Out: Click Setting to display setting interface.
General Alarm: Enable alarm activation through the alarm NVR connected to the selected
output port.
Alarm Out: Enable an alarm channel in which an external alarm is connected.
Latch: Set a length of time that will delay turning off alarms after the external alarm is cancelled. The
value ranges from 0 seconds to 300 seconds, and the default value is 10 seconds. If you enter 0, there
will be no delay.
Show Message: This checkbox allows the user to enable the system to show an on-screen message
when an abnormality occurs.
Send Email: This checkbox allows the user to enable the system to send an email when a motion
detection alarm is triggered.
Buzzer: Check this box to enable a buzzer to be sound on your device if an event occurs.
Log: Check this box to enable a log of the abnormality to be retained into the system.
Voice Prompts: Check this box to enable an imported voice prompt to be used if an event occurs. To use
this feature, select a file from the dropdown box in the File Name section.
To save the settings click the Apply button.
Operation
The Operation menu allows the user to view system information, update, import and export
configuration settings, etc.
Log
This menu allows the user to view log information retained in the system. The system will automatically
retain logs of events which occur during normal operation.
Below is a screenshot of this menu: