Manualshelf

User Manual

ManualsBrandsAmcrest ManualsElectronics4K 16CH AI NVR, Smart NVR, Facial Recognition, Facial Detection & Vehicle Detection - Supports 16 x 4K IP Cameras, Supports 2 x 8TB Hard Drives (Not Included) (No PoE Ports Included)
161162163164165166167168169170
161
Below is an explanation of the fields on the Tour screen:
Enable: This checkbox allows the user to enable the tour functionality.
Interval: Enter the amount of time that you want each channel group displays on the screen. The value
ranges from 5 seconds to 120 seconds, and the default value is 5 seconds.
Video Detect: Select the View 1 or View 8 for Motion Detect tour.
Alarm: Select the View 1 or View 8 for Alarm tours (system alarm events).
Window Split: In the Window Split list, select View 1, View 4, View 8, or other modes that are
supported by the NVR.
Add: This button allows the user to add a channel to the tour.
Delete: This button allows the user to remove a channel from the tour.
Move Up: This button allows the user to move a camera up in the tour queue.
Move Down: This button allows the user to move a camera down in the tour queue.
Click the Default option to set the tour settings back to default. Click the Refresh option to refresh the
interface. Click the Save option to save the tour settings.
Adding a Channel Group
This function provides you the ability for grouping together channels to more efficiently use the tour
options set up on the NVR. To utilize this function, enable the Enable toggle switch and click on the Add
button located in the Main Screen tab of the View Cycle menu. This will take you to the Add Group
interface.
From the interface, select the channels that you want to group with the established tour
settings.
Note: If you want to select more than one channel, in the Window Split list, do not select
View1.