User Manual

171
4
Click , select Logout, Reboot, or Shutdown according to your actual
situation.
5
Displays Cell Phone Client and NVR SN QR Code.
Cell Phone Client: Use your mobile phone to scan the QR code to add the
NVR into the Cell Phone Client, and then you can start accessing the NVR
from your cell phone.
NVR SN: Obtain the NVR SN by scanning the QR code. Go to the P2P
management platform and add the NVR SN into the platform. Then you can
access and manage the NVR in the WAN. For details, please refer to the P2P
operation manual. You can also configure P2P function in the local
configurations.
6
Displays the web main menu.
7
Function
Tiles
Includes eight function tiles: LIVE, VIDEO, ALARM, IVS, IoT, BACKUP,
DISPLAY, and AUDIO. Click each tile to open the configuration interface of
the tile.
LIVE: You can perform the operations such as viewing real-time video,
configuring channel layout, setting PTZ controls, and using smart talk and
instant record functions if needed.
VIDEO: Search for and play back the recorded video saved on the NVR.
ALARM: Search for alarm information and configure alarm event actions.
BACKUP: Search and back up the video files to the local PC or external
storage NVR such as USB storage NVR.
DISPLAY: Configure the display effect such as displaying content, image
transparency, and resolution, etc.
AUDIO: Manage audio files and configure the playing schedule. The audio
file can be played in response to an alarm event if the voice prompts
function is enabled.
8. FAQs/Troubleshooting
1. The NVR does not boot up properly.
Below are a few possible reasons why this may be occurring:
• The power input is not correct voltage.
• The power cable connection is not secured correctly.
• The power button is damaged or malfunctioning.
• The firmware was upgraded incorrectly.
• There is an HDD malfunction, or something is wrong with the HDD cable.
• There is damage to the NVR's main motherboard.
2. NVR often shuts down and stops running.
Below are a few possible reasons why this may be occurring: