Manualshelf

User Manual

ManualsBrandsAmcrest ManualsElectronics4K 16CH AI NVR, Smart NVR, Facial Recognition, Facial Detection & Vehicle Detection - Supports 16 x 4K IP Cameras, Supports 2 x 8TB Hard Drives (Not Included) (No PoE Ports Included)
51525354555657585960
52
State: Indicated the connectivity of a PoE device to the NVR. The green dot means the device is properly
connected; the red dot means the device is disconnected.
Port: The port number the device is active on.
Quality: The overall quality of the PoE connection. This may be displayed without information if this
option is not available in the specific model device.
Enhance: This is used to enhance the performance of the PoE connection. The enhance feature will be
off by default, however, can be enabled in the interface.
Speed (Mbps): The current connection speed (Mbps) of the connected device.
Power (W): The amount, in watts, in which the PoE port is consuming. This may be displayed without
information if this option is not available in the specific model device.
Network
This menu controls all network related functions for the NVR and governs how the NVR interacts with a
connected network.
TCP/IP
TCP/IP stands for Transmission Control Protocol/Internet Protocol and it is the language/protocol that
allows communication between internet connected devices, whether on a local network, or a on the
Internet at large. This screen allows for TCP/IP settings to be modified for the NVR to establish connection
to the network.
Below is a screenshot of the TCP/IP settings screen: