Manualshelf

User Manual

ManualsBrandsAmcrest ManualsElectronics4K 16CH AI NVR, Smart NVR, Facial Recognition, Facial Detection & Vehicle Detection - Supports 16 x 4K IP Cameras, Supports 2 x 8TB Hard Drives (Not Included) (No PoE Ports Included)
51525354555657585960
55
Maximum Connection: This field represents the maximum number of users that can be connected to
the NVR at the same time. The maximum number of users the NVR can support at one time is 128.
TCP Port: This field designates the Transmission Control Protocol (TCP) port number. The default value is
37777.
UDP Port: This field designates the User Datagram Protocol (UDP) port number. The default value is
37778.
HTTP Port: This field designates the Hypertext Transfer Protocol (HTTP) port number. The default value
is 80.
HTTPS Port: This field designates the Hypertext Transfer Protocol Secure (HTTPS) port number. The
default value is 443.
RTSP Port: This field designates the Real Time Streaming Protocol (RTSP) port number. The default value
is 554.
To revert to default settings, click the Default button near the bottom left hand corner. Press the
Refresh button to refresh the interface. To confirm settings, click the Apply button near the bottom
right hand corner. Click the Back button to exit the interface.
PPPoE
PPPoE stands for Point-to-Point Protocol over Ethernet. This screen allows users to configure PPPoE
connections. Below is a screenshot of the PPPoE screen: